Portable lighting Rechargeable halo handlamps

HR Series

Watertight, hardwearing, torches for professional use, equipped with halogen bulb, nickel-cadmium battery and electronic circuit with microprocessor that provides various operating modes.

The torches have a mobile support that means they can be placed in different positions, as well as an LED pilot lamp that informs the user about the battery’s available capacity in three levels:

-Green: Available capacity of 100% to 60%
-Yellow: Available capacity of 60% to 20%
-Red: Available capacity of less than 20%

The HRF HRT HRFT versions (models with two pushbuttons) have front and/or back signalling for constant or flashing operation via LEDs in various colours and quantity combinations.

The torches are recharged via an external charger specifically manufactured for this purpose. The torch simply sits on the charger and can be left charging indefinitely, without damaging the battery life. When it is fully recharged, the green LED on the torch flashes.


Other functions
-Light with maximum and medium power and flashing modes.
-Both the light and the signalling switch off automatically when the torch is placed on the charger.
-When the torch is placed on its charger it switches on automatically for 3 minutes in the event of a loss of voltage.

View PDF HR Series

——————————————————————————

Technical features
Halogen lamp 6V-G4 of 3, 5, 10, 20 W
-Brightness: 42, 78, 205, 475 lumens
-Battery: Ni-Cd 6V / 1,5 ÷ 4 Ah
-Burning: 1 ÷ 8 horas
-Control without signalling: 1 push button
-Control with signalling: 2 push buttons
-Protection degree: IP67 – 1m
-Body: Engineering plastics in black, red, yellow or blue colours
-Temperature: -40ºC ÷ +60ºC
-Insulation: class III
-Weight: 750 g – 1250 g
-Certification: CE

——————————————————————————

Accessory
Shoulder strap. Ref. C-HR1

——————————————————————————

Chargers HR Series
The HR torch fits into its charger via two floating sockets, which recharge its battery. The torch can be left in charging position on the charger indefinitely, without damaging the battery life. Super-tough polyamide housing.

For mounting on cars or walls the charger has two blades with holes for attachment with a screw and a mechanical fastening system for flashlight.

View PDF chargers HR Series

facebook
  • Imagen 1/7
  • Imagen 1/7
  • Imagen 1/7
  • Imagen 1/7
  • Imagen 1/7
  • Imagen 1/7
  • Imagen 1/7